Certified and primary calibration gas standards are used for instrument calibration and other monitoring and measurement applications where either use of an EPA Protocol calibration standard is not required or an EPA Protocol standard is not available.
As with all Spectra environmental standards, Certified Environmental Calibration Standards are produced gravimetrically directly traceable to NIST standards in cylinders that have been individually passivated by the proprietary Spectrashield™ process.
In addition, where NIST or comparable international standards are available, analysis are performed utilizing these international standards. Where standards are not available from international metrology organizations, Spectra employs in-house developed analysis technology and standards to provide you with the most accurate and reliable standards available.
Each cylinder is individually analyzed and supplied with a Certificate of Analysis (C of A).
TYPICAL SPECIFICATIONS
CERTIFIED STANDARDS
PRIMARY STANDARDS
Concentration Range |
Blend Tolerance |
Analysis |
Blend Tolerance |
Analysis |
< 100 ppb |
Consult factory |
Consult factory |
Consult factory |
Consult factory |
100 ppb to 999 ppb |
± 20% |
± 10% |
± 10% |
± 5% |
1 ppm TO 9999 ppm |
± 10% |
± 5% |
± 5% |
± 1% |
1% |
± 5% |
± 2% |
± 1% |
± 0.02% absolute |
Certified and primary calibration gas standards are available in size 2A, 3A, and 4A aluminum cylinders and where appropriate in size 2, 3, and 4 internally polished and passivated steel cylinders.
All certified and primary calibration gas standards are filled to the maximum pressure and volume as determined by the cylinder, the vapor pressure of the mixture, or restrictions due to flammable-oxidizer (flam-ox) requirements.
1. Vapor pressure constraints will limit fill pressure/volume at higher concentrations of this standard
2. Flam/ox constraints will limit fill pressure/volume at higher concentrations of this standard.